High definition Welding Oxygen Cylinder - ER50/70 SERIES PRESSURE REGULATORS – Ainuo Technology
Short Description:
INTERNAL RELIEF VALVLE AND FILTER OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE WIDE OUTLET-PRESSURE REGULATION RANGE ACCURATE PRESSURE REGULATION MANUAL RESET TWO-STAGE REGULATION ER50ER70 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics ...
High definition Welding Oxygen Cylinder - ER50/70 SERIES PRESSURE REGULATORS – Ainuo Technology Detail:
INTERNAL RELIEF VALVLE AND FILTER
OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE
WIDE OUTLET-PRESSURE REGULATION RANGE
ACCURATE PRESSURE REGULATION
MANUAL RESET
TWO-STAGE REGULATION
ER50ER70 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics of small size,easy to stall,pressure stability,rapid reponse.
TECHNICAL DATA
| Inlet pressure | Pemax.≤6 bar | |
| Shut-off when over-pressure | Who:22.5-350 mbar | |
| Inlet pressure range | Bpe:0.6-5 bar | |
| Shut-off when low-pressure | Whu:12.8-60 mbar | |
| Outlet pressure set range | standard | Wh: 15-70 mbar |
| HP | Wh:20-300 mbar | |
| Shut-off accuracy | AG: ≤5% | |
| Accuracy class | AC: ±5% | |
| Response time | Ta: ≤1 sec | |
| Shut-off pressure class | SG: +10% | |
| Flow rate (natural gas) | Qmax. ≤70Nm³/h | |
| Operating temprature | -20℃-60℃ | |
| Threaded connection | 3/4”Χ1 1/4” | |
| Ambient temperature | -30℃-60℃ | |
| Weight | Low pressure type:2kgHigh pressure type:2.5kg | |
CAPACITY CHART
|
Outlet pressure （mbar） |
Inlet pressure（bar） |
||||||
|
0.1 （bar） |
0.2 （bar） |
0.3 （bar） |
0.4 （bar） |
0.5 （bar） |
0.75 （bar） |
1.10 （bar） |
|
|
15 |
25 |
35 |
50 |
60 |
70 |
70 |
75 |
|
20 |
25 |
35 |
50 |
60 |
70 |
70 |
75 |
|
30 |
25 |
30 |
45 |
55 |
70 |
70 |
75 |
|
40 |
25 |
30 |
40 |
50 |
65 |
70 |
70 |
|
50 |
20 |
30 |
40 |
50 |
65 |
70 |
70 |
|
60 |
20 |
30 |
40 |
50 |
60 |
60 |
65 |
|
50 |
15 |
30 |
40 |
45 |
55 |
60 |
60 |
|
60 |
15 |
30 |
40 |
45 |
55 |
70 |
70 |
|
70 |
20 |
30 |
40 |
45 |
55 |
70 |
70 |
|
80 |
20 |
30 |
35 |
45 |
55 |
70 |
70 |
|
90 |
20 |
30 |
35 |
45 |
50 |
70 |
70 |
|
100 |
20 |
20 |
30 |
35 |
45 |
65 |
70 |
|
150 |
- |
20 |
30 |
35 |
45 |
60 |
70 |
|
200 |
- |
- |
25 |
30 |
40 |
50 |
70 |
|
250 |
- |
- |
20 |
30 |
40 |
50 |
60 |
|
300 |
- |
- |
- |
25 |
30 |
45 |
60 |
ER 50/70 (low pressure type)
ER 50/70-AP (high pressure type)
Capacities (cu.m./hr) are applicable to natural gas with a specific gravity of 0.702. For other gases, the values shown in the chart below must be multiplied by 0.595 for propane, 0.518 for butane, 0.755 for nitrogen and 0.744 for air.
OUTLINE DIMENSIONS (mm)
Product detail pictures:
Related Product Guide:
Learning More About Propane Gas Regulators
How to Use LPG Gas Regulators
It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for High definition Welding Oxygen Cylinder - ER50/70 SERIES PRESSURE REGULATORS – Ainuo Technology, The product will supply to all over the world, such as: New Zealand , New Delhi , Oslo , Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !
By Michelle
from Azerbaijan
- 2016.04.08 14:55
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Belle
from Finland
- 2016.12.09 14:01
