Big discounting Two Gauge Welding Regulator - ER100 SERIES PRESSURE REGULATORS – Ainuo Technology
Short Description:
INTERNAL RELIEF VALVLE AND FILTER OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE WIDE OUTLET-PRESSURE REGULATION RANGE ACCURATE PRESSURE REGULATION MANUAL RESET TWO-STAGE REGULATION ER100 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics of ...
Big discounting Two Gauge Welding Regulator - ER100 SERIES PRESSURE REGULATORS – Ainuo Technology Detail:
INTERNAL RELIEF VALVLE AND FILTER
OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE
WIDE OUTLET-PRESSURE REGULATION RANGE
ACCURATE PRESSURE REGULATION
MANUAL RESET
TWO-STAGE REGULATION
ER100 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics of small size,easy to stall,pressure stability,rapid reponse.
TECHNICAL DATA
| Inlet pressure | Pemax.≤6 bar | |
| Shut-off when over-pressure | Who:22.5-350 mbar | |
| Inlet pressure range | Bpe: 1-5 bar | |
| Shut-off when low-pressure | Whu:12.8-60 mbar | |
| Outlet pressure set range | standard | Wh: 15-70 mbar |
| HP | Wh:20-300 mbar | |
| Shut-off accuracy | AG: ≤5% | |
| Accuracy class | AC: ±5% | |
| Response time | Ta: ≤1 sec | |
| Shut-off pressure class | SG: +10% | |
| Flow rate (natural gas) | Qmax. ≤100Nm³/h | |
| Operating temprature | -20℃-60℃ | |
| Threaded connection | 3/4”Χ1 1/4” | |
| Ambient temperature | -30℃-60℃ | |
| Weight | Low pressure type:2kg
High pressure type:2.5kg |
|
CAPACITY CHART
Capacities (cu.m./hr) are applicable to natural gas with a specific gravity of 0.702. For other gases, the values shown in the chart below must be multiplied by 0.595 for propane, 0.518 for butane, 0.755 for nitrogen and 0.744 for air.
OUTLINE DIMENSIONS (mm)
Product detail pictures:
Related Product Guide:
How to Use LPG Gas Regulators
Learning More About Propane Gas Regulators
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Big discounting Two Gauge Welding Regulator - ER100 SERIES PRESSURE REGULATORS – Ainuo Technology, The product will supply to all over the world, such as: Pakistan , Albania , Kyrgyzstan , Our company is an international supplier on this kind of merchandise. We supply an amazing selection of high-quality merchandise. Our goal is to delight you with our distinctive collection of mindful items while providing value and excellent service. Our mission is simple: To supply the best items and service to our customers at the lowest prices possible.
By Arthur
from Peru
- 2015.06.09 12:42
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Ella
from Provence
- 2016.11.20 15:58
