High Quality for Current Regulator Welding Machine - ER50/70 SERIES PRESSURE REGULATORS – Ainuo Technology
Short Description:
INTERNAL RELIEF VALVLE AND FILTER OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE WIDE OUTLET-PRESSURE REGULATION RANGE ACCURATE PRESSURE REGULATION MANUAL RESET TWO-STAGE REGULATION ER50ER70 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics ...
High Quality for Current Regulator Welding Machine - ER50/70 SERIES PRESSURE REGULATORS – Ainuo Technology Detail:
INTERNAL RELIEF VALVLE AND FILTER
OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE
WIDE OUTLET-PRESSURE REGULATION RANGE
ACCURATE PRESSURE REGULATION
MANUAL RESET
TWO-STAGE REGULATION
ER50ER70 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics of small size,easy to stall,pressure stability,rapid reponse.
TECHNICAL DATA
| Inlet pressure | Pemax.≤6 bar | |
| Shut-off when over-pressure | Who:22.5-350 mbar | |
| Inlet pressure range | Bpe:0.6-5 bar | |
| Shut-off when low-pressure | Whu:12.8-60 mbar | |
| Outlet pressure set range | standard | Wh: 15-70 mbar |
| HP | Wh:20-300 mbar | |
| Shut-off accuracy | AG: ≤5% | |
| Accuracy class | AC: ±5% | |
| Response time | Ta: ≤1 sec | |
| Shut-off pressure class | SG: +10% | |
| Flow rate (natural gas) | Qmax. ≤70Nm³/h | |
| Operating temprature | -20℃-60℃ | |
| Threaded connection | 3/4”Χ1 1/4” | |
| Ambient temperature | -30℃-60℃ | |
| Weight | Low pressure type:2kgHigh pressure type:2.5kg | |
CAPACITY CHART
|
Outlet pressure （mbar） |
Inlet pressure（bar） |
||||||
|
0.1 （bar） |
0.2 （bar） |
0.3 （bar） |
0.4 （bar） |
0.5 （bar） |
0.75 （bar） |
1.10 （bar） |
|
|
15 |
25 |
35 |
50 |
60 |
70 |
70 |
75 |
|
20 |
25 |
35 |
50 |
60 |
70 |
70 |
75 |
|
30 |
25 |
30 |
45 |
55 |
70 |
70 |
75 |
|
40 |
25 |
30 |
40 |
50 |
65 |
70 |
70 |
|
50 |
20 |
30 |
40 |
50 |
65 |
70 |
70 |
|
60 |
20 |
30 |
40 |
50 |
60 |
60 |
65 |
|
50 |
15 |
30 |
40 |
45 |
55 |
60 |
60 |
|
60 |
15 |
30 |
40 |
45 |
55 |
70 |
70 |
|
70 |
20 |
30 |
40 |
45 |
55 |
70 |
70 |
|
80 |
20 |
30 |
35 |
45 |
55 |
70 |
70 |
|
90 |
20 |
30 |
35 |
45 |
50 |
70 |
70 |
|
100 |
20 |
20 |
30 |
35 |
45 |
65 |
70 |
|
150 |
- |
20 |
30 |
35 |
45 |
60 |
70 |
|
200 |
- |
- |
25 |
30 |
40 |
50 |
70 |
|
250 |
- |
- |
20 |
30 |
40 |
50 |
60 |
|
300 |
- |
- |
- |
25 |
30 |
45 |
60 |
ER 50/70 (low pressure type)
ER 50/70-AP (high pressure type)
Capacities (cu.m./hr) are applicable to natural gas with a specific gravity of 0.702. For other gases, the values shown in the chart below must be multiplied by 0.595 for propane, 0.518 for butane, 0.755 for nitrogen and 0.744 for air.
OUTLINE DIMENSIONS (mm)
Product detail pictures:
Related Product Guide:
3 Basic Elements to Know About Your Gas Regulator
Overview on Gas Regulators to Safely Run Your Restaurant
We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for High Quality for Current Regulator Welding Machine - ER50/70 SERIES PRESSURE REGULATORS – Ainuo Technology, The product will supply to all over the world, such as: Niger , Spain , Florence , Our company has already had a lot of top factories and qualified technology teams in China, offering the best goods, techniques and services to worldwide customers. Honesty is our principle, skilled operation is our work, service is our goal, and customers' satisfaction is our future!
By Lee
from Oslo
- 2016.03.07 13:42
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Antonia
from Malta
- 2015.06.21 17:11
