ODM Supplier Butt Welding Check Valves - LQ100 SERIES PRESSURE REGULATORS – Ainuo Technology
Short Description:
INTERNAL RELIEF VALVLE AND FILTER OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE WIDE OUTLET-PRESSURE REGULATION RANGE ACCURATE PRESSURE REGULATION MANUAL RESET TWO-STAGE REGULATION LQ100 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics of ...
ODM Supplier Butt Welding Check Valves - LQ100 SERIES PRESSURE REGULATORS – Ainuo Technology Detail:
INTERNAL RELIEF VALVLE AND FILTER
OPTIONAL MAXIMUM AND/OR MINIMUM PRESSURE SLAM-SHUT VALVE
WIDE OUTLET-PRESSURE REGULATION RANGE
ACCURATE PRESSURE REGULATION
MANUAL RESET
TWO-STAGE REGULATION
LQ100 series is direct acting of two-level regulator, Widely used for transmission and distribution of nature gas,liquefied petroleum gas or other non-corrosive gas for industrial users and residential users.Built-in filter,relief valve and overpressure cut off protection devices.With characterstics of small size,easy to stall,pressure stability,rapid reponse.
TECHNICAL DATA
| Inlet pressure | Pemax.≤6 bar | |
| Shut-off when over-pressure | Who:22.5-350 mbar | |
| Inlet pressure range | Bpe: 1-5 bar | |
| Shut-off when low-pressure | Whu:12.8-60 mbar | |
| Outlet pressure set range | standard | Wh: 15-70 mbar |
| HP | Wh:20-300 mbar | |
| Shut-off accuracy | AG: ≤5% | |
| Accuracy class | AC: ±10% | |
| Response time | Ta: ≤1 sec | |
| Shut-off pressure class | SG: +20% | |
| Flow rate (natural gas) | Qmax. ≤100Nm³/h | |
| Operating temprature | -20℃-60℃ | |
| Threaded connection | 3/4”Χ1 1/4” | |
| Ambient temperature | -30℃-60℃ | |
| Weight | Low pressure type:2kg
High pressure type:2.5kg |
|
CAPACITY CHART
Capacities (cu.m./hr) are applicable to natural gas with a specific gravity of 0.702. For other gases, the values shown in the chart below must be multiplied by 0.595 for propane, 0.518 for butane, 0.755 for nitrogen and 0.744 for air.
OUTLINE DIMENSIONS (mm)
Product detail pictures:
Related Product Guide:
Overview on Gas Regulators to Safely Run Your Restaurant
Learning More About Propane Gas Regulators
We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for ODM Supplier Butt Welding Check Valves - LQ100 SERIES PRESSURE REGULATORS – Ainuo Technology, The product will supply to all over the world, such as: Venezuela , Pakistan , Istanbul , Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Edward
from Seattle
- 2016.11.11 11:41
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Page
from Hungary
- 2015.02.21 12:14
